Make-noise DPO Manuel d'utilisateur télécharger pdf (Page 15)

7. To calibrate VCO A 1V/ Octave Scale, use VCO B (that is now tuned) as reference.

8. Monitor VCO A and B SINEs. Patch or Midi to CV to VCO A 1V/ Octave INput (6), and FOLLOW (5)

still at 0%.

9. Send note C6 to the DPO and adjust the VCO A FREQ (2A) and FINE TUNE (4A) Panel Controls so

the DPO VCO A pitch matches that of the reference (DPO VCO B).

10. Send note C3 to the DPO and adjust the VCO A 1V/ Octave Trimmer (3A) on the DPO so the pitch

matches that of the reference.

11. Repeat steps 3 and 4 until satisfaction or exhaustion is achieved.

12. Check across 4 or 5 octaves and adjust if necessary. The DPO will track musically. Expect variance

across 4 octaves. Get the tuning so it is useful to you, and then go make noise!

1 2 ... 10 11 12 13 14 15 16 17

Pas de commentaire

Make-noise DPO Manuel d'utilisateur Page 15